Step by Step Installation Instructions
for Installing your Turn@bout®

You will need the following tools for installation.

Includes: Turn@bout®, drill bit, hex wrench, and template for drilling-holes.

Raise pallet jack to full height

For 48″ inch forks
Measure 21″ inches from back of pallet jack,
and mark both forks.

For 42″ inch forks
Measure 18″ inches from back of pallet jack,
and mark both forks.

Go to next step…

Align side of template with mark as

shown. Place template flat on top of

fork and slide to outside edge.

Go to next step…

Hold template firmly in place – drill one hole. Temporarily

drop-in one screw to help keep template in place.
Drill other hole.

Go to next step…

Place Turn@bout® as shown
and install screws.

Repeat all steps for
other side/fork.

You are done! Enjoy the increased

maneuverability by 72%. And no

more wide turns or having to kick

or wrestle the pallet jack into position.